$500.00 – $600.00
The PWC Lift is a affordable lift for your personal watercraft or jet ski. Order a PWC Lift for one or two of your PWC’s.
Simple PWC Lift
The PWC Lift is an affordable and easy boat lift for two jet skis. No cables to break or expensive parts. The PWC Jack Lift is a manual lift that uses an aluminum frame and aluminum screw jacks to raise the PWC out of the water for safe storage. This lift measures 10′ wide by 8′ long and uses 8′ long wood bunks. 1600 lb. weight capacity for the Double and 1200lb for the Single. The stationary shore end legs are adjustable from 4″ to 20″ before installation and the aluminum jacks on the lake end have a travel of 18″ with an adjustable starting height ranging from 6″ to 46″. Includes manual speed cranks for the aluminum jacks. Alternately, the jacks can be operated using a cordless drill. Choose either the Single Lift for one jet ski, or the Double Lift for two!
How the Jacks Work:
- Guide your jet ski onto the lift with the jacks lowered
- Screw the jacks up so the jet ski is out of the water
- 3/4 inch nut turns a screw gear inside
- Turn the jack nut using the provided crank handle or a 3/4 inch wrench, ratchet or cordless drill from the top of the decking
- 18″ of travel in the Jack
Ships in a box right to your door!
If you have a small pontoon boat, paddle boat or flat bottom watercraft, check out the Jack Lift.
Inside Width (Beam): 107 inches (Double); 60 inches (Single)
Outside Length: 96 inches
Lifting Capacity: 1600 pounds (Double); 1200lbs (Single)
Base Weight: 95 pounds
Frame Material: Aluminum (Marine Grade 6061-T6)
Adjustment Range per Jack: 18 inches (28" minimum; 58" maximum with leg)
Jack Material: Aluminum with Stainless Steel Worm Gear
Jack Adjustment Style: Rotate 3/4 inch Nut with Cordless Drill or Socket Wrench
Jack Weight Capacity: 1000 pounds each
Hardware material: Grade 8 Zinc-plated
Hardware size: 3/8" or 1/2"
(1) Boat Lift Frame
(2) Lift Jacks
(2) Shore Side Legs
(1-2) PWC Bunk Hardware sets
(1) Crank Handle
*Bunks not included